Best Ways To Clean Steelcase Leap Chair

How to clean Steelcase leap chair – The Steelcase leap chair is a popular choice for office workers, as it is comfortable and supportive. However, it can become dirty over time, and needs to be cleaned regularly to maintain its appearance and function. 

There are a number of ways to clean a Steelcase leap chair, and the best method will depend on the type of dirt or stains that need to be removed.

In this blog post, we will share some tips on how to clean the leap chair and keep it looking new. 

See Also: Are Steelcase Chairs Worth It? The Ultimate Guide

How to clean Steelcase leap chair

If you own a Steelcase Leap Chair, you know how comfortable and stylish it is. But over time, it can start to look a little dirty. Here are some tips on how to clean your Leap Chair and keep it looking its best.

You will need the following materials to clean your Leap using a vacuum cleaner:

• A vacuum cleaner with a dusting attachment
• A soft, dry cloth
• A slightly damp cloth

Clean the surface

Here’s a step-by-step guide to cleaning the surface of your Steelcase chair:

1. Start by dusting off the surface of the chair with a soft cloth.
2. If there are any stubborn dirt or stains on the chair, use a mild soap and water solution to spot-clean those areas.
3. Once you’ve spot-cleaned the chair, give it an overall wipe-down with a damp cloth.
4. Finally, dry the chair off with a clean, dry cloth.

And that’s it! By following these simple steps, you can easily clean the surface of your Steelcase chair.

Using vacuum cleaner

Here is a step-by-step guide to cleaning your chair using a vacuum cleaner.

1. Start by vacuum-cleaning the seat and backrest of the chair. If there are any areas that are particularly dirty, you can use the brush attachment of the vacuum cleaner to scrub them gently.
2. Vacuum cleans the arms of the chair. Again, if there are any areas that are particularly dirty, you can use the brush attachment to scrub them.
3. Vacuum clean the base of the chair. Make sure to get into all the nooks and crannies so that the chair is completely clean.

Deep cleaning

When it comes to deep cleaning a Steelcase leap chair, you have to separate each part to deeply clean your leap chair. Here’s a simple step to separate all the parts and clean those parts:

• Seat cushion
• Backrest
• Lumbar support
• Armrests
• Casters

Seat cushion cleaning

If you need to remove the seat cushion of your Steelcase Leap chair, follow these steps:

1. Lift up the seat cushion to access the bolts that secure it to the chair. (Most Steelcase Leap chairs have a velcro attachment that makes this easy. If yours doesn’t have velcro, you may need to unscrew the seat cushion from the chair.)
2. Remove the bolts with a socket wrench or other appropriate tool.
3. Lift the seat cushion off of the chair.

Vacuum the seat cushion to remove any dirt and dust. If there are any stubborn stains, you can spot-clean them with a mild detergent.

Once the seat cushion is clean, you can reattach it to the chair. To reattach the seat cushion, align the seat cushion with the bolts on the chair. Reinsert the bolts and tighten them with a socket wrench or other appropriate tool.

Backrest cleaning

When it comes to keeping your office chair clean, the backrest is often one of the most neglected areas. 

To remove the backrest of your Leap, follow these simple steps:

1. Remove the seat cushion by unscrewing the four screws that hold it in place.
2. Unhook the two metal clips that secure the backrest to the chair frame.
3. Lift the backrest off the chair.
4. To reattach the backrest, simply reverse these steps.

It’s essential to keep this area clean as it can easily collect dust and dirt. Here are some simple tips on how to clean the backrest of a Leap chair:

1. Start by vacuuming the backrest to remove any surface dirt and dust.
2. Then, use a lint-free cloth dampened with water and mild soap to wipe down the backrest. Be sure to rinse the cloth often to avoid leaving any soap residue behind.
3. Once you’ve wiped down the backrest, use a dry cloth to buff it until it shines.
4. For tougher stains, you can use a mild abrasive cleaner. Apply the cleaner to a lint-free cloth and rub it into the stain. Rinse the area well and buff dry.

By following these simple tips, you can easily keep the backrest of your Leap clean and looking new.

Lumbar support cleaning

If you have a Steelcase Leap Chair with lumbar support, you know how important it is to keep it clean. Here is a step-by-step guide on how to clean your lumbar support and keep it looking new.

1. Start by dusting off the lumbar support with a soft cloth.
2. If there are any stubborn stains, you can use mild soap and water to spot-clean the area.
3. Once you have removed any stains, use a lint-free cloth to wipe down the lumbar support with distilled water.
4. Allow the lumbar support to air dry completely before using it again.

By following these simple steps, you can keep your Steelcase Leap Chair lumbar support clean.

Armrests cleaning

First, you have to remove dust or dirt from the armrests with a dry cloth. If there are any tougher stains, you can use a damp cloth with some mild soap. Once you’ve removed the surface dirt, it’s time to move on to cleaning the upholstery.

To do this, mix together 1 part water and 1 part vinegar in a spray bottle. lightly mist the armrests with the mixture and then use a microfiber cloth to scrub away any dirt or stains.

Once you’re done, simply wipe the armrests down with a dry cloth, and voila! You now have clean armrests on your Steelcase Leap chair.

How to clean Steelcase chair caster?

Cleaning the caster wheel is very easy! Just follow these simple steps:

1. Start by removing the wheels from the chair. Most chair models will have a mechanism for doing this – consult your chair’s manual if you’re not sure how.
2. Once the wheels are off, use a soft cloth to dust them. Pay special attention to the crevices, as dirt and dust can accumulate there.
3. If the wheels are still looking a bit grimy, you can use a mild soap and water solution to clean them. Just be sure to dry them thoroughly afterward.
4. Once you’re finished cleaning, simply reattach the wheels to your chair and you’re good to go!

Final thoughts

I have shown you a step-by-step guide on “how to clean Steelcase leap chair”. After cleaning each and every part of your chair, simply re-attach them.

Useful Links:

Best chairs for long hours at the computer

How to adjust Steelcase chairs